Search results

In complex environments, a spherical robot has great application value. When the pendulum spherical robot is stopped or disturbed, there will be a periodic oscillation. This situation will seriously affect the stability of the spherical robot. Therefore, this paper aims to propose a control method based on backstepping and disturbance observers for oscillation suppression.

This paper analyzes the mechanism of oscillation. The oscillation model of the spherical robot is constructed and the relationship between the oscillation and the internal structure of the sphere is analyzed. Based on the oscillation model, the authors design the oscillation suppression control of the spherical robot using the backstepping method. At the same time, a disturbance observer is added to suppress the disturbance.

It is found that the control system based on backstepping and disturbance observer is simple and efficient for nonlinear models. Compared with the PID controller commonly used in engineering, this control method has a better control effect.

The proposed method can provide a reliable and effective stability scheme for spherical robots. The problem of instability in real motion is solved.

In this paper, the oscillation model of a spherical robot is innovatively constructed. Second, a new backstepping control method combined with a disturbance observer for the spherical robot is proposed to suppress the oscillation.

Unmanned aerial/ground vehicles (UAV/UGV) collaboration systems are increasingly being used to perform reconnaissance and rescue missions autonomously, especially in disaster areas. The paper aims to discuss this issue.

To improve visibility, this study proposes a path-planning algorithm based on map matching. Continuous ground images are first collected aerially using the UAV vision system. Subsequently, a global map of the ground environment is created by processing the collected images using the methods of image correction, image mosaic and obstacle recognition. The local map of the ground environment is obtained using the 2D laser radar sensor of the UGV. A set of features for both global and local maps is established. Unknown values during map matching are determined via the least squares method. Based on the matched mapping, the traditional A* algorithm is used for the planning of global path in the global map, and the dynamic window method is used for adjustment of the local map.

Simulation experiments were carried out to demonstrate the effectiveness of the proposed algorithm. The experimental results show that the proposed algorithm can construct a global map of the wide environment and effectively bypass the obstacles missed by the UAV.

Prior to map matching, there is a need to extract the edge of obstacles in the global map.

This paper proposed a path planning algorithm based on map matching, yielding insights into the application of the UAV/UGV collaboration systems in disaster areas.

The characteristics of spherical robots, such as under-drive, non-holonomic constraints and strong coupling, make it difficult to establish its motion control model accurately. To improve the anti-interference performance of spherical robots in practical engineering, this paper proposes a spherical robot motion controller based on auto-disturbance rejection control (ADRC) with parameter tuning.

This paper considers the influences of the spherical shell, internal frame and pendulum on the movement of the spherical robot during the rotation to establish the multi-body dynamics model of the XK-I spherical robot. Due to the serious coupling problem of the dynamic model, the motion control state equation is constructed using linearization and decoupling. The XK-I spherical robot PSO-ADRC motion controller with parameter tuning function is designed by combining the state equation with the particle swarm optimization (PSO) algorithm. Finally, experiments are performed to evaluate the feasibility of PSO-ADRC in an actual case compared to ADRC, PSO-PID and PID.

By analyzing the required time to reach the expected value, the control stability and the fluctuation range of the standard deviation after reaching the expected value, the superiority of PSO-ADRC to ADRC, PSO-PID and PID is demonstrated in terms of the speed and anti-interference ability.

The proposed method can be applied to the robot control field.

A parameter-tuning method for auto-disturbance-rejection motion control of the spherical robot is proposed. According to the experimental results, the anti-interference ability of the spherical robot moving on uneven ground is improved. Therefore, it provides a foundation for the autonomous environmental monitoring of the spherical robot equipped with sensors.

This paper aims to present a method to improve the sensitive and low probabilities of false alarm of a manipulator in a human–robot interaction environment, which can improve the performance of the system owing to non-linear uncertainty in the model of the robot controller.

A novel collision detection method based on adaptive residual estimation is proposed, promoting the detection accuracy of the collision of the manipulator during operation. First, a general momentum residual estimator is designed to incorporate the non-linear factors of the manipulator (e.g. joint friction, speed and acceleration) into the residual-related uncertainty of the model. Second, model parameters are estimated through gradient correction. The residual filter is used to determine the dynamic threshold, resulting in higher detection accuracy. Finally, the performance of the residual estimation scheme is evaluated by comparing the dynamic threshold with residual in real-time experiments where a single Universal Robot 5 robot end–effector collides with the obstacle.

Experimental results demonstrate that the collision detection system can improve sensitivity and lead to low probabilities of false alarm of non-linear uncertainty in the model.

The method proposed in this article can be applied to industry and human–robot interaction area.

An adaptive collision detection method is proposed in this paper to address non-linear uncertainties of the model in industrial application.

The purpose of this study is to propose a modeling method of the equivalent circuit for a new type of high-temperature superconducting partial-core transformer (HTS-PCT) made of ReBCO-coated conductors.

The modeling process is based on the “Steinmetz” equivalent circuit. The impedance components in the circuit are obtained by the calculations of the core losses and AC losses of the HTS windings by using theoretical methods. An iterative computation is also used to decide the equivalent resistances of the AC losses of the primary and secondary HTS windings. The reactance components in the circuit are calculated from the energy stored in the magnetic fields by finite element method. The validation of the modeling method is verified by experimental results

The modeling method of the equivalent circuit of HTS-PCT is valid, and an equivalent circuit for HTS-PCT is presented.

The equivalent circuit of HTS-PCT could be obtained by the suggested modeling method. Then, it is easy to analyze the characteristics of the HTS-PCT by its equivalent circuit. Moreover, the modeling method could also be useful for the design of a specific HTS-PCT.

The study proposes a modeling method of the HTS-PCT made of the second-generation HTS tapes, i.e. ReBCO-coated conductors.